1. Home
  2. Manufacturing

Industries · Manufacturing

Solar for Cebu Factories. Cut the daytime bill that runs your lines.

Factories use most of their power during day shifts: motors, compressors, ovens, chillers and lighting. Commercial rooftop solar supplies that load directly, so the meter turns slower exactly when your plant is busiest. We design systems from 50 kW to 500 kW and above for plants across Cebu.

  • 50–500 kW+ three-phase systems
  • 3–5 yrs typical payback
  • Zero-export power used on-site
Aerial view of a Cebu factory with solar panels covering its metal roof

Why it fits

Why does solar suit Cebu manufacturers?

Because the factory day and the solar day overlap. Production lines, air compressors and cooling run from morning to late afternoon, which is when panels produce. Sized below your daytime load, almost every kWh the panels make replaces a kWh you would have bought, and most plants recover the cost in 3 to 5 years.

Factory roofs also help: large metal roofs on warehouses and production halls can carry big arrays with little or no structural change. We check the roof, the purlins and your main switchboard before we quote.

Our commercial systems are set up as zero-export, so the inverter keeps the power inside the plant. Day-shift plants usually need no battery, which keeps the upfront cost lower; see grid-tied solar.

  • Three-phase rooftop, carport and ground-mounted systems
  • Tier-1 620–630 W N-type bifacial panels and Solis inverters
  • Schneider Electric protection and stainless fixings for coastal plants
  • Metro Cebu service: we aim to reach you within 48 hours
Manufacturing

Which manufacturing businesses do we cover in Cebu?

Each page explains the loads, roof types and system choices for that kind of business, with Cebu utility rates and our package and warranty details.

  • Food Processing

    Lower cooker, chiller, compressor and packing-line power costs at Cebu food plants with three-phase Tier-1 solar, 50–500 kW+. 3–5 yr payback.

  • Electronics & Semiconductors

    Lower cleanroom aircon, compressor and production-line power costs at Cebu electronics plants with three-phase Tier-1 solar. 3–5 yr payback.

  • Garments & Textiles

    Cut sewing-floor aircon, steam press, cutting and lighting bills at Cebu garment and textile factories with Tier-1 solar. 3–5 yr payback.

  • Furniture & Woodcraft

    Lower saw, planer, sander, dust collector and spray-booth power costs at Cebu furniture and woodcraft shops with Tier-1 solar. Personalized quote.

  • Packaging & Consumer Goods

    Cut extruder, printer, sealer and compressor power costs at Cebu packaging and consumer-goods plants with three-phase Tier-1 solar. Personalized quote.

  • Pharmaceuticals

    Cut HVAC, cleanroom and cold-chain power costs at Cebu pharmaceutical plants and warehouses with three-phase Tier-1 solar. 3–5 yr payback.

  • Metal Fabrication

    Cut welding, cutting, press and compressor power costs at Cebu metal fabrication shops with three-phase Tier-1 solar. Personalized quote.

  • Automotive Parts

    Lower compressor, press and production-line power costs at Cebu automotive parts plants with three-phase Tier-1 solar, 50–500 kW+. Personalized quote.

  • Bakeries & Bread Factories

    Cut electric oven, mixer, proofer and chiller bills at Cebu bakeries and bread factories with Tier-1 solar and brownout backup. Personalized quote.

  • Beverage & Bottling Plants

    Lower filling-line, compressor, chiller and RO power costs at Cebu beverage and bottling plants with three-phase Tier-1 solar. 3–5 yr payback.

  • Snack Food Plants

    Lower fryer, slicer, seasoning and packing-line power costs at Cebu snack and chip factories with three-phase Tier-1 solar. Personalized quote.

  • Meat Processing

    Lower blast freezer, cold-room and grinder power costs at Cebu meat processors with Tier-1 three-phase solar and backup. 3–5 yr payback. Personalized quote.

  • Vinegar & Condiments

    Cut pump, mixer, bottling and packing power costs at Cebu vinegar and condiment factories with Tier-1 solar. Fixed price after a site visit.

  • Cacao & Chocolate

    Lower roaster, grinder, conche and cold-room power costs for Cebu cacao and tablea makers with Tier-1 solar and LiFePO4 backup. Personalized quote.

  • Ice Plants

    Lower compressor and brine-tank power costs at Cebu ice plants with three-phase Tier-1 solar that works hardest when demand peaks. Personalized quote.

  • Ceramics & Tile

    Cut press, glazing line and compressor power costs at Cebu ceramic and tile plants with three-phase Tier-1 solar, 50–500 kW+. Personalized quote.

  • Chemical & Paint Plants

    Lower mixer, mill and compressor power costs at Cebu chemical and paint plants with three-phase Tier-1 solar. 3–5 yr payback. Personalized quote.

  • Soap & Detergent

    Cut mixer, mill, plodder and packing power costs at Cebu soap and detergent plants with three-phase Tier-1 solar. 3–5 yr payback. Personalized quote.

  • Glass & Mirror Fabrication

    Cut cutting, edging, tempering-support and compressor power costs at Cebu glass and mirror shops with Tier-1 solar. Personalized quote.

  • Rubber & Footwear

    Lower press, mixer, stitching and aircon power costs at Cebu rubber and footwear factories with three-phase Tier-1 solar. 3–5 yr payback.

  • Mattress & Foam

    Cut foaming, cutting, quilting and aircon power costs at Cebu mattress and foam factories with three-phase Tier-1 solar. 3–5 yr payback. Personalized quote.

  • Candles & Wax

    Cut wax melting, mixing and packing power costs at Cebu candle factories with Tier-1 commercial solar. Fixed price after a site visit.

  • Rope & Twine

    Cut twisting, braiding and winding machine power costs at Cebu rope and twine factories with Tier-1 three-phase solar. Personalized quote.

  • Printing & Publishing

    Cut press, cutter, binder and aircon power costs at Cebu printing and publishing houses with Tier-1 commercial solar. 3–5 yr payback. Personalized quote.

  • Jewelry & Fashion Workshops

    Cut polishing, casting, aircon and lighting bills at Cebu jewelry and accessory workshops with Tier-1 solar and battery backup. Personalized quote.

  • Marine Equipment

    Lower machining, welding and compressor power costs at Cebu marine equipment plants with three-phase Tier-1 solar and salt-air fixings. Personalized quote.

  • Woodworking & Sawmills

    Lower bandsaw, planer, kiln fan and dust collector power costs at Cebu sawmills and woodworking shops with three-phase Tier-1 solar. Personalized quote.

Choosing a system

Which solar setup fits which kind of plant?

The shift pattern decides most of it. Plants that stop at dusk get the fastest payback from a system with no battery; plants with night shifts or sensitive equipment look at a battery for part of the load.

Plant typeUsual setupWhy
Day-shift productionGrid-tied, zero-exportSolar meets the daytime load; lowest upfront cost
Cold rooms, chillers, ovensGrid-tied, sized to the base loadSteady daytime demand uses every kWh produced
Night shifts or sensitive controlsHybrid with battery for key circuitsBattery backup for the circuits you choose
Small roof, open yardGround-mount or carportAdds capacity beyond the roof

Commercial systems are quoted individually after a site visit. Read the commercial buyer’s guide to compare bids.

How it works

How does a factory solar project run?

Four steps, planned around your production schedule. You see a fixed, itemized price before paying anything, and the final payment comes after the system is tested.

Step 1 · Load data

Share your bills

Send 12 months of bills and your shift hours; we model the daytime load and payback.

Step 2 · Site visit

Roof and switchboard check

Our system designers check the roof, purlins, shade and main switchboard, then give one itemized quote.

Step 3 · Build

Install around production

Pay 40% on order and 40% on delivery and mounting. We help with the LGU electrical permit.

Step 4 · Switch-on

Test and hand over

We test, set up Solis monitoring and train your team; then the last 20% is due.

Questions from Cebu plant owners and managers

Short answers to what factory owners ask most. The industry pages above cover the loads and roof types for each kind of plant.

Will installation stop our production?

Most of the work happens on the roof while the plant runs. The tie-in to your switchboard needs a short, planned shutdown, which we schedule with you.

Do we need batteries for a factory system?

Usually not for day-shift plants. A zero-export grid-tied system gives the lowest upfront cost. Add a battery only for circuits that must run through brownouts or at night.

How do we pay for a large system?

In three stages (40/40/20), or with a bank loan using our itemized quote and datasheets. See payment and financing and the incentives guide for the tax questions to ask your accountant.

What warranties come with a factory system?

5 years on our workmanship, 12 years on Solis inverters and 30 years on panel performance (at least 87% output at year 30). See the Warranty page.

More on this topic

Solar for businesses: what else should you read?

  • Commercial Solar in Cebu

    Three-phase commercial solar for Cebu factories, warehouses, cold storage, resorts and schools, 50 kW to 500 kW+. Tier-1 panels, custom quote after a visit.

  • How Many Solar Panels Does a Cebu Factory Need?

    Work out panel counts for 50, 100, 250 and 500 kW+ Cebu factories from 12 months of bills, ~4.6 sun hours and 620–630 W panels. Worked examples inside.

  • Is Solar Worth It for Small Businesses in Cebu?

    For Cebu cafés, clinics, laundromats and offices paying ₱15+/kWh, daytime solar usually pays back in 3–5 years. See the numbers and when it is not worth it.

  • Commercial Solar Buyer's Guide for Cebu (2026)

    How to compare commercial solar quotes in Cebu: panels, inverters, switchgear, wind bracing and 5/12/30 warranties. The questions to ask every installer.

  • Solar vs Diesel Generator in Cebu

    Compare solar and LiFePO4 storage with diesel generators for Cebu farms, resorts and cold stores: fuel, noise, upkeep and 3–5 yr solar payback.

  • Brownout Solutions in Cebu

    Stop losing work, stock and sleep to Cebu brownouts. LiFePO4 hybrid solar switches on automatically for homes, offices, clinics and cold rooms.

  • Solar Financing in Cebu

    Ways to pay for solar in Cebu: 40/40/20 payment stages, a Pag-IBIG or bank loan backed by our itemized quote, or start small and add later. 3–5 yr payback.

See all solar guides

Get your personalized solar quote

Tell us about your place, pin it on the map and add a photo of your bill. Our team replies on Viber within one business day.

  • 1. We size your system from your bill and map your roof by satellite.
  • 2. You get your quote: panels, battery, monthly savings, payback and price.
  • 3. Happy with it? We check your roof and wiring on site, then lock in one fixed price.
OUR OFFICE Mclin Building, Corner T. Padilla St. and M.J. Cuenco Ave., Cebu City 0947 711 6402 · [email protected] Mon-Sat 8:00 AM - 6:00 PM

About a minute. Fields marked with an asterisk are required.

Home or business?
A pin lets us map your roof before we call. Optional.
Roof type
When would you like your solar installed?
How would you pay? (optional)
Photo of your bill (optional, makes your quote exact)
Add a package or notes (optional)
  • Reply within 1 business day
  • No obligation
  • No spam, ever